A commercial hack squat machine usually weighs about 390 to 690 lb empty, based on the listed specs of the six hack squats we carry. The sled you push (the starting weight before plates) is usually 80 to 125 lb. Fully loaded, a big plate loaded hack squat can put roughly 1,700 lb on your floor once you count the frame, the plates, and you. That last number matters more than the first if you are planning a garage, an upstairs room, or a small studio floor.
How much does a hack squat machine weigh?
There are three different numbers people mean when they ask this, and they answer different questions:
- Frame weight. The steel machine on its own. This is what your crew lifts off the truck and what sits on the floor every day.
- Starting weight (sled weight). What you push before you add a single plate. This is the number you add to your logbook.
- Loaded weight. Frame plus every plate on the sled and the storage horns, plus the lifter. This is the number your floor feels.
Here are the listed specs for the hack squats on our floor, new BUILT Strength and remanufactured:
| Machine | Frame weight | Starting weight | Listed capacity | Footprint (L x W x H) |
|---|---|---|---|---|
| BUILT Strength 'OG' Series Linear Hack Squat (New) | 690 lb | 90 lb | 18 x 45 lb plates | 100 x 67 x 48 in |
| BUILT Strength Infinite Series Linear Hack Squat (New) | 504 lb | 125 lb (listed per arm) | 8 x 45 lb plates per arm | 85 x 61 x 59 in |
| BUILT Strength Throwback Series Hack Squat (New) | 390 lb | Not listed | 6 storage positions | 81 x 61 x 54 in |
| Hoist Fitness Hack Squat (Remanufactured) | 494 lb | 88 lb | 630 lb max | 84.75 x 60.5 x 52 in |
| Nautilus Hack Squat (Remanufactured) | 446 lb | 80 lb carriage | 900 lb max load | 93 x 72 x 47 in |
| Hoist Fitness ROC-IT Hack Squat / Dead Lift / Shrug (Remanufactured) | 533 lb | Counterbalanced | 450 lb exercise | 89.75 x 58.5 x 59.5 in |
Specs are the manufacturer and product page listings. You can compare every model side by side in our hack squat machines collection.
How much does the hack squat sled weigh without plates?
Most plate loaded hack squat sleds start somewhere between 80 and 125 lb. On the machines above, the Nautilus carriage is 80 lb, the Hoist starts at 88 lb, the BUILT Strength 'OG' Series starts at 90 lb, and the BUILT Strength Infinite Series lists 125 lb of starting resistance. Counterbalanced designs like the Hoist ROC-IT are built so the empty machine feels light, which makes them friendlier for beginners and rehab clients.
Two machines with the same plates on them will not feel the same. Starting weight, the angle of the track, and how smooth the bearings run all change what you feel at the bottom of the rep.
Should you count the sled weight in your hack squat total?
Yes, as long as you are consistent. Log the starting weight plus your plates, and always on the same machine. A number from one gym's hack squat does not transfer to another brand.
Also know that you are not moving the full plate total straight up. You push along an angled track, so only part of the load works against you. On a track near 45 degrees that is roughly 70 percent of the total, before friction. That is why a hack squat number looks bigger than your barbell squat, and it is not a reason to skip progressive overload.
How much weight does a loaded hack squat put on the floor?
This is the number that matters for home gyms. Take the BUILT Strength 'OG' Series Linear Hack Squat as the heavy end of the range:
The 690 lb frame plus a full load of 18 x 45 lb plates (810 lb) plus a 200 lb lifter comes to about 1,700 lb. Spread across the 100 x 67 inch footprint, that averages about 37 lb per square foot. The real load is not even, though. It sits on the machine's feet, and it moves every rep. A slab garage floor handles that easily. An upstairs room is a different conversation, so read our guide to upper floor home gym weight limits and talk to a structural engineer before you put a loaded hack squat above grade.
Does a lighter hack squat mean a worse machine?
Not by itself. Frame weight mostly tracks size, steel gauge, and how many storage horns a machine has. The BUILT Strength Throwback Series is the lightest frame on our list at 390 lb, and it still runs fully enclosed linear bearings on 11 gauge steel. The 'OG' Series is heavier because it is longer, holds 18 plates on four horns, and adds an adjustable deck angle and band pegs.
What to check instead of raw weight:
- Bearings and track. Smooth linear bearings matter more than an extra 100 lb of steel.
- Starting weight. If newer lifters or older clients will use it, a lower start or a counterbalanced sled is a real feature.
- Plate storage. Built in horns keep plates off the floor but add to the loaded floor weight.
- Footprint. Length is usually the limiting number. These machines run 81 to 100 inches long before you add room to step in and load plates.
How heavy is a hack squat machine to ship and move?
Plan delivery around the shipping weight, not the frame weight. For example, the BUILT Strength 'OG' Series lists a 690 lb frame and an 830 lb shipping weight. Machines in this class ship by LTL freight, need a liftgate or a forklift at delivery, and take at least two people to move into place. Check doorway widths and the path to the room before the truck shows up. Our shipping and installation checklist walks through every step, and we deliver and install from our Texas warehouses.
Hack squat or leg press: which is easier on space and weight?
A hack squat usually has a shorter footprint and a lower starting weight than a plate loaded 45 degree leg press, and it trains the quads in a more upright squat pattern. If you are still deciding between the two, read hack squat vs leg press, or compare a linear hack to an arc path machine in pendulum squat vs hack squat. You can also browse the full BUILT Strength 'OG' Series, BUILT Strength Infinite Series, and BUILT Strength Throwback Series lineups.
Frequently asked questions
How much does a hack squat machine weigh?
Most commercial hack squat machines weigh about 390 to 690 lb empty. On our floor, the BUILT Strength Throwback Series is 390 lb and the BUILT Strength 'OG' Series Linear Hack Squat is 690 lb.
What is the starting weight of a hack squat machine?
Usually 80 to 125 lb before plates. The Nautilus carriage is 80 lb, the Hoist Fitness Hack Squat starts at 88 lb, and the BUILT Strength 'OG' Series starts at 90 lb.
Do you count the hack squat sled in your weight?
Yes. Add the starting weight to your plates and track it on the same machine every time, since sled weight and track angle vary by brand.
Can I put a hack squat machine in a second floor room?
Maybe, but check first. A fully loaded hack squat can put around 1,700 lb on a small footprint. Have a structural engineer confirm the floor before you install it upstairs.
Is a heavier hack squat machine better?
Not automatically. Bearings, track smoothness, starting weight, and footprint matter more than frame weight alone.
Can I finance a hack squat machine?
Yes. See how gym equipment financing works for terms and what you need to apply.