Parcel ground shipping
Items weighing 149 lb or less ship by ground parcel rather than freight.
Bars, handles and straps shown in photos are not always included. Check the description, or add attachments to your order.
Receive by Nov 3
Remanufactured
Matrix G7 Biceps Curl
$2,995.00
Save $3,004 (50%)
vs $5,999 new
Parts & Labor, Fully Rebuilt
Remanufactured to full mechanical spec, covered from the day it lands.
Bars, handles and straps shown in photos are not always included. Check the description, or add attachments to your order.
Shipping calculator
Enter your state and ZIP code to see delivery options and prices.
Machine overview
Condition: Remanufactured
Warranty: 1 Year Parts & Labor (Extended Available)
Returns: 30-Day Returns & Exchanges
Shipping: Driveway Delivery, or Inside Delivery & Assembly
Receive by: Nov 3
How It Ships: Fully Assembled
Delivery options
How delivery works
Your item’s shipping method and price are confirmed in the shipping calculator and at checkout. Here is what each delivery path means.
Driveway freight delivery
Your equipment is palletized and protected. The freight carrier schedules delivery, then uses a liftgate to lower it to your curb or driveway. Moving it inside and unpacking it are up to you.
Inside delivery & assembly
When selected and available for your address, the delivery team brings the equipment into the room, assembles and tests it, then removes the packaging.
Full truckload
For commercial builds and multi-pallet orders, a dedicated trailer keeps the full order together in one delivery. We confirm the unloading plan before the truck ships.
Size: 53" × 64" × 53" tall
What Remanufactured Means
Every remanufactured machine is fully disassembled, deep cleaned, repaired or re-parted to factory spec, then tested under load before it ships. Backed by one year parts and labor, with extended coverage available.
Warranty Coverage
New and remanufactured equipment are both covered for one year, parts and labor, backed by us. Extended protection is available on either through BAG Care+. Used equipment is sold as-is with no warranty coverage, and is described honestly before you buy. We service nationwide - every ZIP code in the country - so coverage travels with the machine.
30-Day Returns & Exchanges
Change your mind within 30 days of delivery and you can return the machine or exchange it for a different size, color or configuration.
Return shipping is the customer's responsibility and a 15% restocking fee applies to preference returns and exchanges. Freight items must go back packaged to the same standard they arrived in — we will tell you exactly what that means before anything is collected.
Anything that arrives damaged or fails under warranty is handled separately and carries no restocking fee. Full terms are in our Returns, Exchange & Refund Policy.
Add before it ships
Before the freight bookingCoverage and accessories have to go on the same booking as the machine. Add them here and they travel together.
Extended warrantyRecommendedEvery machine includes 1 year parts and labor.
Pairs well with this
Nothing selected yet
Added as separate lines on your order.
Rebuilt in our Jarrell, TX shop
What remanufactured means here
Every machine we sell as remanufactured goes through the same process, whatever the brand or the price. Not a wipe-down and a price tag.
-
Inspected and stripped down
Assessed frame to console, then taken apart and checked part by part. Nothing gets judged from the outside.
-
Wear parts replaced
Belts, cables, bearings, bushings, grips and safety-critical hardware are replaced as standard, whether or not they still have life in them.
-
Refinished and rebuilt to spec
Electronics bench-tested, frames and welds checked, panels refinished, then reassembled to the manufacturer's specification.
-
Tested under load
A full operational cycle under load before it ships. Anything that fails the final check goes back through service, not onto a truck.
Get an email when new machines land
Good units go fast. We'll email you when new machines land - nothing else.
Product details
Commercial-grade equipment, inspected and supported by warranty.
The Matrix G7 Biceps Curl isolates the upper arm through independent movement arms - each side curls on its own, so the stronger arm can't carry the weaker one and users can train one arm or both. Pivoting elbow pads move with the joint, keeping the elbow aligned with the machine's axis for a smooth, controlled curl from full extension to peak contraction.
Rotating, action-specific handles reduce wrist strain, and an open, easy-entry design eliminates chest compression so users can get in, set up, and train comfortably. A fully shielded 200 lb stack, electronic rep counter, and heavy-gauge G7 frame make it a polished finishing piece for commercial strength floors, performance facilities, and serious home gyms.
Primary muscles targeted
Biceps
Secondary muscles
Brachialis Forearms
Key features
Independent movement arms
Each arm curls on its own for single-arm or dual-arm training and more balanced development side to side.
Pivoting elbow pads
Pads move with the arm to keep the elbow aligned with the pivot, with protective covers at the touchpoints.
Rotating action-specific grips
Handles rotate through the curl to reduce wrist stress and minimize pressure at the hands.
Open, easy-entry design
No chest pad pressing into the torso - users step in, set up, and train with unrestricted breathing and comfort.
Specifications
Dimensions (L × W × H)
53" × 64" × 53"
1350 × 1625 × 1350 mm
Product weight
587 lb
266 kg
Weight stack
200 lb
10 lb increments
Incremental weights
2.5 / 5 / 7.5 lb
Fine-tune any load
1. How do I select weight on a selectorized machine?
Insert the weight pin into the desired stack hole; ensure it clicks into place before use.
2. What weight stack size should I choose?
Most base level weight stacks can accommodate even advanced lifters, but for the real weight-movers, look for the items with expansion stacks.
3. What maintenance is required?
Inspect guide rods and stack alignment monthly; wipe rods and replace worn bushings annually.
4. Is installation available?
Yes—schedule professional installation during checkout for a seamless setup.
5. What warranty covers these machines?
New units carry full OEM coverage; remanufactured units include a 12 month Build A Gym Guarantee.
30-Day Returns & Exchanges
Buy with confidence. Every Build A Gym order includes a 30-day window to return or exchange, whether you want a different size, color or configuration. Return shipping is the customer's responsibility and a 15% restocking fee applies to preference returns; warranty and damage claims carry no restocking fee. Full details in our Returns, Exchange & Refund Policy.
The Matrix G7 Biceps Curl isolates the upper arm through independent movement arms - each side curls on its own, so the stronger arm can't carry the weaker one and users can train one arm or both. Pivoting elbow pads move with the joint, keeping the elbow aligned with the machine's axis for a smooth, controlled curl from full extension to peak contraction.
Rotating, action-specific handles reduce wrist strain, and an open, easy-entry design eliminates chest compression so users can get in, set up, and train comfortably. A fully shielded 200 lb stack, electronic rep counter, and heavy-gauge G7 frame make it a polished finishing piece for commercial strength floors, performance facilities, and serious home gyms.
Primary muscles targeted
Biceps
Secondary muscles
Brachialis Forearms
Key features
Independent movement arms
Each arm curls on its own for single-arm or dual-arm training and more balanced development side to side.
Pivoting elbow pads
Pads move with the arm to keep the elbow aligned with the pivot, with protective covers at the touchpoints.
Rotating action-specific grips
Handles rotate through the curl to reduce wrist stress and minimize pressure at the hands.
Open, easy-entry design
No chest pad pressing into the torso - users step in, set up, and train with unrestricted breathing and comfort.
Specifications
Dimensions (L × W × H)
53" × 64" × 53"
1350 × 1625 × 1350 mm
Product weight
587 lb
266 kg
Weight stack
200 lb
10 lb increments
Incremental weights
2.5 / 5 / 7.5 lb
Fine-tune any load
1. How do I select weight on a selectorized machine?
Insert the weight pin into the desired stack hole; ensure it clicks into place before use.
2. What weight stack size should I choose?
Most base level weight stacks can accommodate even advanced lifters, but for the real weight-movers, look for the items with expansion stacks.
3. What maintenance is required?
Inspect guide rods and stack alignment monthly; wipe rods and replace worn bushings annually.
4. Is installation available?
Yes—schedule professional installation during checkout for a seamless setup.
5. What warranty covers these machines?
New units carry full OEM coverage; remanufactured units include a 12 month Build A Gym Guarantee.
30-Day Returns & Exchanges
Buy with confidence. Every Build A Gym order includes a 30-day window to return or exchange, whether you want a different size, color or configuration. Return shipping is the customer's responsibility and a 15% restocking fee applies to preference returns; warranty and damage claims carry no restocking fee. Full details in our Returns, Exchange & Refund Policy.
Save 5%
Complete the room
The machines our install crew puts in the same room as this one - priced as one shipment, delivered in one booking.
$2,995.00
This machine
Bundle total
- Items
- $5,304.00
- Bundle price
- $5,038.80
- Estimated bundle saving
- −$265.20
- Ships complete in
- 4–6 weeks
One freight booking, one delivery window, one crew. Inside Delivery & Assembly available on the whole bundle.