Parcel ground shipping
Items weighing 149 lb or less ship by ground parcel rather than freight.
Bars, handles and straps shown in photos are not always included. Check the description, or add attachments to your order.
Receive by Dec 7estimated, may change
Remanufactured
Precor Discovery Series Plate Loaded Angled Leg Press
$3,195.00
4.8
Save $3,395 (51%)
vs $6,590 new
Only 1 left in stock
Parts & Labor, Fully Rebuilt
Remanufactured to full mechanical spec, covered from the day it lands.
Bars, handles and straps shown in photos are not always included. Check the description, or add attachments to your order.
Shipping calculator
Enter your state and ZIP code to see delivery options and prices.
Machine overview
Condition: Remanufactured
Warranty: 1 Year Parts & Labor (Extended Available)
Returns: 30-Day Returns & Exchanges
Shipping: Driveway Delivery, or Inside Delivery & Assembly
Receive by: Dec 7
How It Ships: Fully Assembled
Delivery options
How delivery works
Your item’s shipping method and price are confirmed in the shipping calculator and at checkout. Here is what each delivery path means.
Driveway freight delivery
Your equipment is palletized and protected. The freight carrier schedules delivery, then uses a liftgate to lower it to your curb or driveway. Moving it inside and unpacking it are up to you.
Inside delivery & assembly
When selected and available for your address, the delivery team brings the equipment into the room, assembles and tests it, then removes the packaging.
Full truckload
For commercial builds and multi-pallet orders, a dedicated trailer keeps the full order together in one delivery. We confirm the unloading plan before the truck ships.
Size: 94" × 55" × 57" tall
What Remanufactured Means
Every remanufactured machine is fully disassembled, deep cleaned, repaired or re-parted to factory spec, then tested under load before it ships. Backed by one year parts and labor, with extended coverage available.
Warranty Coverage
New and remanufactured equipment are both covered for one year, parts and labor, backed by us. Extended protection is available on either through BAG Care+. Used equipment is sold as-is with no warranty coverage, and is described honestly before you buy. We service nationwide - every ZIP code in the country - so coverage travels with the machine.
30-Day Returns & Exchanges
Change your mind within 30 days of delivery and you can return the machine or exchange it for a different size, color or configuration.
Return shipping is the customer's responsibility and a 15% restocking fee applies to preference returns and exchanges. Freight items must go back packaged to the same standard they arrived in. We will tell you exactly what that means before anything is collected.
Anything that arrives damaged or fails under warranty is handled separately and carries no restocking fee. Full terms are in our Returns, Exchange & Refund Policy.
Add before it ships
Before the freight bookingCoverage and accessories have to go on the same booking as the machine. Add them here and they travel together.
Extended warrantyRecommendedEvery machine includes 1 year parts and labor.
Pairs well with this
Nothing selected yet
Added as separate lines on your order.
Build A Gym
-
a month ago
★★★★★
Great communication, products, and I'm very happy with what I purchased from them. I will be back!
Read on Google -
a month ago
★★★★★
Just want to say thank you to the team at CTX!! Not only was shipping fast and efficient, but customer service was outstanding!! Any question that was needed to be answered was meet with a quick response. Thank you again!!
Read on Google -
a month ago
★★★★★
Dillon was very helpful, patient with answering all my questions, very knowledgeable. He insured I had all the necessary answers before I made my purchase. Thanks Dillon, great customer service!
Read on Google -
2 months ago
★★★★★
I was thinking about getting Ozempic, but I’m not in the mood to go blind yet. So I decided I’d do it the old fashioned way and called CTX.
Read on Google -
2 months ago
★★★★★
CTX Built is a great company to work with. Excellent communication and customer service. Their team was easy to work with and extremely helpful. Would do more business with them and I plan to.
Read on Google -
2 months ago
★★★★★
CTX stands by their products. I recently purchased a Precor elliptical from them & it arrived with a mechanical flaw. They coordinated with a technician to get my product fixed like new. They accomplished this despite the fact that my home was two states away. Special thank you to Nichole for staying accessible and attentive throughout the process!
Read on Google -
2 months ago
★★★★★
Great product and awesome leadership. Equipment was straight forward to build and team is always responsive when needing information or any help whatsoever. So glad I found them for outfitting my gym, best decision I have ever made for my business!
Read on Google -
2 months ago
★★★★★
Absolutely best in business! Not only is Dillon just genuinely a great human being, he’s real and honest. Loved everything I’ve gotten from him and the team. I’m about 10-15 pieces in deep with him and not stopping anytime soon! Absolutely recommend hitting these guys up for home/commercial equipment. New or refurbished!
Read on Google -
4 months ago
★★★★★
Excellent selection of products with a large selection, consultants will help you decide
Read on Google -
4 months ago
★★★★★
Dillion was great to work with!! Super friendly, quick turn around time, and great at communicating! The guys who delivered it Robb and JJ were also amazing. They came prepared and were very fast and efficient. They offered to help us move around other equipment to ensure we loved our gym! Super nice people and an amazing company! I would highly recommend working with them. Oh and the equipment itself is high quality and looks great in our home gym!
Read on Google -
5 months ago
★★★★★
I inquired to sell a few machines from my personal training studio. From beginning to the end, customer service was great! CTX was very quick with responses and communication was there! I very much will take my business back to CTX, and I highly recommend them.
Read on Google -
5 months ago
★★★★★
Bought this refurbished Matrix Stair mill and from the minute I mesaged about it they offered great communication and shipping was perfectly coordinated! Highly recommend this CTX Gym
Read on Google -
5 months ago
★★★★★
We purchased a Woodway treadmill from CTX Home Gyms and had a warranty issue a few months later. Dylan and his team were quick to respond, communicated throughout the process, and got everything resolved right away. Great customer service — highly recommend this company.
Read on Google -
5 months ago
★★★★★
I can’t say enough great things about CTX Home Gyms. They did an incredible job on both my commercial gym and my home gym setup. The entire process was seamless from beginning to end — professional communication, top-quality equipment, attention to detail, and outstanding customer service.
Read on Google
They truly know fitness equipment and how to create a space that looks amazing and functions at a high level. Whether you’re building a home gym or a full commercial facility, I highly recommend CTX Home Gyms. They made the entire experience easy, stress-free, and exceeded every expectation. -
5 months ago
★★★★★
Dillon and his team outfitted my entire new gym. We worked together from the beginning stages. They had the same exact vision I had. They did everything possible to make our dream gym. And they did!!
Read on Google
The entire experience was amazing. I literally told them what I wanted and they made it even better. The Build line is amazing. I get compliments on it daily. From the stitching on the equipment to how smooth it is. I can not say enough good things about it. And the plate loaded build equipment is legit. I’m an equipment snob. I love finding the old pieces. But this stuff is even better. Pure quality and can stand some big weights!
We plan on opening a couple more gyms, and we are definitely usi -
6 months ago
★★★★★
Great company, Excellent Attention to Detail, Very Good Customer Service & the Price is Right!!!
Read on Google
Rebuilt in our Jarrell, TX shop
What remanufactured means here
Every machine we sell as remanufactured goes through the same process, whatever the brand or the price. Not a wipe-down and a price tag.
-
Inspected and stripped down
Assessed frame to console, then taken apart and checked part by part. Nothing gets judged from the outside.
-
Wear parts replaced
Belts, cables, bearings, bushings, grips and safety-critical hardware are replaced as standard, whether or not they still have life in them.
-
Refinished and rebuilt to spec
Electronics bench-tested, frames and welds checked, panels refinished, then reassembled to the manufacturer's specification.
-
Tested under load
A full operational cycle under load before it ships. Anything that fails the final check goes back through service, not onto a truck.
Get an email when new machines land
Good units go fast. We'll email you when new machines land - nothing else.
Shop photo
Real photo, similar machine
From our shop: Precor Discovery Series
A Precor Discovery Series Plate Loaded Calf Raise from the same series, photographed mid-remanufacture in our Texas shop. This model goes through the same process.
- Model shown
- Precor Discovery Series Plate Loaded Calf Raise
- Stage
- On the bench
- Photographed
- Oct 7, 2026
- Where
- Our shop in Texas
- Headed to
- Rebuilt by
Rob L.
- Inspected frame to console, then fully disassembled
- Belts, cables, bearings and grips replaced as standard
- Tested under load before it ships
This photo shows a Precor Discovery Series Plate Loaded Calf Raise, not this exact model. Every machine we sell goes through the same process.
See the full remanufacturing processProduct details
Commercial-grade equipment, inspected and supported by warranty.
The Precor Discovery Series Plate Loaded Angled Leg Press delivers plate-loaded lower body training on a smooth angled track system with an oversized foot platform, ergonomic back and hip support, and heavy-duty Precor Discovery commercial construction - 556 lb machine, Olympic plates not included, 94"×55" footprint. The angled leg press design positions the user reclined at an angle with the feet pressing upward and away along a guided track - the angle is the biomechanical specification that determines how compressive load distributes between the knee and the hip during the press. A steeper angle (closer to vertical) shifts more of the load to the hip and reduces the shear component at the knee; a shallower angle increases knee involvement. The angled configuration also allows the user to load heavier plates than they could position in a horizontal or seated press, because gravity assists with keeping the sled stable against the platform at the start of each set rather than requiring the user to hold the sled before initiating the press. The oversized foot platform supports a full range of foot placement variations - high foot placement targets the glutes and hamstrings; low foot placement shifts emphasis to the quads; wide stance engages the adductors; narrow stance isolates the outer quad - each foot placement producing a meaningfully different posterior-to-anterior loading ratio across the same pressing movement. Plate-loaded resistance is unlimited by a selectorized stack ceiling, allowing progressive loading from light rehabilitation through maximum competitive leg press training.
Smooth track system for consistent controlled motion. Ergonomic seating and back support for proper hip and spine alignment. 556 lb Precor Discovery commercial leg press frame, 94"×55" footprint. Weight plates not included. Remanufactured.
Primary muscles targeted
Quadriceps Gluteus Maximus Hamstrings Calves
Secondary muscles
Adductors Hip Flexors Core Stabilizers
Key features
Angled Track · Oversized Foot Platform - Four Distinct Loading Patterns
Angled design positions the press along a guided inclined track - distributing compressive load between the knee and hip based on the angle and foot placement. Oversized platform supports high foot (glute/hamstring emphasis), low foot (quad emphasis), wide stance (adductor engagement), and narrow stance (outer quad isolation) - each a meaningfully different posterior-to-anterior loading ratio across the same pressing movement.
Plate-Loaded · Smooth Track · 556 lb Commercial Frame
Plate-loaded resistance has no selectorized stack ceiling - progressive loading from light rehabilitation through maximum competitive leg press training. Smooth track system delivers consistent, controlled motion with no binding or resistance variation through the press arc. 556 lb commercial-grade Discovery frame built for sustained heavy-use daily operation. Olympic plates sold separately.
Specifications
Dimensions (L × W × H)
94" × 55" × 56.5"
Machine Weight
556 lb
Plates sold separately
Resistance
Plate-Loaded
Angled track · Oversized platform · Smooth track system
Design
Angled · Plate-Loaded · Oversized Platform · 556 lb
Angled track design · Plate-loaded Olympic · Oversized foot platform · Smooth track system · Ergonomic back support · 556 lb frame · 94"×55" footprint · Plates not included
1. What are the exact dimensions and space requirements for this leg press?
The machine measures 94 inches long, 55 inches wide, and 57 inches high, with a 36 square foot footprint. Allowing extra clearance around the machine is suggested for safe plate loading and movement.
2. How is resistance provided on this machine and are weight plates included?
This leg press is plate-loaded, so you add your own Olympic weight plates to set resistance. Weight plates are not included.
3. Which muscle groups does this machine target and how does foot placement affect training?
It primarily targets the quadriceps, glutes, hamstrings, and calves. The oversized foot platform allows varied foot positions to shift emphasis between these muscle groups.
4. What is the condition of the machine and what does remanufactured mean?
Remanufactured means the machine was previously owned and rebuilt in our Texas shop with full disassembly, cleaning, repairs, and testing. Cosmetic marks from prior use may remain, but it is certified for commercial use.
5. What warranty is included with this remanufactured leg press?
It comes with a 1-year parts and labor warranty from the delivery date. Extended coverage is available as BAG Care+ on the product page.
6. What delivery and assembly options are available for this machine?
You can choose Driveway Freight Delivery or Inside Delivery & Assembly at checkout. Stairs require a separate quote and more details are on the product page.
30-Day Returns & Exchanges
Buy with confidence. Every Build A Gym order includes a 30-day window to return or exchange, whether you want a different size, color or configuration. Return shipping is the customer's responsibility and a 15% restocking fee applies to preference returns; warranty and damage claims carry no restocking fee. Full details in our Returns, Exchange & Refund Policy.
The Precor Discovery Series Plate Loaded Angled Leg Press delivers plate-loaded lower body training on a smooth angled track system with an oversized foot platform, ergonomic back and hip support, and heavy-duty Precor Discovery commercial construction - 556 lb machine, Olympic plates not included, 94"×55" footprint. The angled leg press design positions the user reclined at an angle with the feet pressing upward and away along a guided track - the angle is the biomechanical specification that determines how compressive load distributes between the knee and the hip during the press. A steeper angle (closer to vertical) shifts more of the load to the hip and reduces the shear component at the knee; a shallower angle increases knee involvement. The angled configuration also allows the user to load heavier plates than they could position in a horizontal or seated press, because gravity assists with keeping the sled stable against the platform at the start of each set rather than requiring the user to hold the sled before initiating the press. The oversized foot platform supports a full range of foot placement variations - high foot placement targets the glutes and hamstrings; low foot placement shifts emphasis to the quads; wide stance engages the adductors; narrow stance isolates the outer quad - each foot placement producing a meaningfully different posterior-to-anterior loading ratio across the same pressing movement. Plate-loaded resistance is unlimited by a selectorized stack ceiling, allowing progressive loading from light rehabilitation through maximum competitive leg press training.
Smooth track system for consistent controlled motion. Ergonomic seating and back support for proper hip and spine alignment. 556 lb Precor Discovery commercial leg press frame, 94"×55" footprint. Weight plates not included. Remanufactured.
Primary muscles targeted
Quadriceps Gluteus Maximus Hamstrings Calves
Secondary muscles
Adductors Hip Flexors Core Stabilizers
Key features
Angled Track · Oversized Foot Platform - Four Distinct Loading Patterns
Angled design positions the press along a guided inclined track - distributing compressive load between the knee and hip based on the angle and foot placement. Oversized platform supports high foot (glute/hamstring emphasis), low foot (quad emphasis), wide stance (adductor engagement), and narrow stance (outer quad isolation) - each a meaningfully different posterior-to-anterior loading ratio across the same pressing movement.
Plate-Loaded · Smooth Track · 556 lb Commercial Frame
Plate-loaded resistance has no selectorized stack ceiling - progressive loading from light rehabilitation through maximum competitive leg press training. Smooth track system delivers consistent, controlled motion with no binding or resistance variation through the press arc. 556 lb commercial-grade Discovery frame built for sustained heavy-use daily operation. Olympic plates sold separately.
Specifications
Dimensions (L × W × H)
94" × 55" × 56.5"
Machine Weight
556 lb
Plates sold separately
Resistance
Plate-Loaded
Angled track · Oversized platform · Smooth track system
Design
Angled · Plate-Loaded · Oversized Platform · 556 lb
Angled track design · Plate-loaded Olympic · Oversized foot platform · Smooth track system · Ergonomic back support · 556 lb frame · 94"×55" footprint · Plates not included
1. What are the exact dimensions and space requirements for this leg press?
The machine measures 94 inches long, 55 inches wide, and 57 inches high, with a 36 square foot footprint. Allowing extra clearance around the machine is suggested for safe plate loading and movement.
2. How is resistance provided on this machine and are weight plates included?
This leg press is plate-loaded, so you add your own Olympic weight plates to set resistance. Weight plates are not included.
3. Which muscle groups does this machine target and how does foot placement affect training?
It primarily targets the quadriceps, glutes, hamstrings, and calves. The oversized foot platform allows varied foot positions to shift emphasis between these muscle groups.
4. What is the condition of the machine and what does remanufactured mean?
Remanufactured means the machine was previously owned and rebuilt in our Texas shop with full disassembly, cleaning, repairs, and testing. Cosmetic marks from prior use may remain, but it is certified for commercial use.
5. What warranty is included with this remanufactured leg press?
It comes with a 1-year parts and labor warranty from the delivery date. Extended coverage is available as BAG Care+ on the product page.
6. What delivery and assembly options are available for this machine?
You can choose Driveway Freight Delivery or Inside Delivery & Assembly at checkout. Stairs require a separate quote and more details are on the product page.
30-Day Returns & Exchanges
Buy with confidence. Every Build A Gym order includes a 30-day window to return or exchange, whether you want a different size, color or configuration. Return shipping is the customer's responsibility and a 15% restocking fee applies to preference returns; warranty and damage claims carry no restocking fee. Full details in our Returns, Exchange & Refund Policy.
Save 5%
Complete the room
The machines our install crew puts in the same room as this one - priced as one shipment, delivered in one booking.
$3,195.00
This machine
Bundle total
- Items
- $3,433.28
- Bundle price
- $3,261.62
- Estimated bundle saving
- −$171.66
- Everything arrives by
- Dec 7
One freight booking, one delivery window, one crew. Inside Delivery & Assembly available on the whole bundle.