Parcel ground shipping
Items weighing 149 lb or less ship by ground parcel rather than freight.
Bars, handles and straps shown in photos are not always included. Check the description, or add attachments to your order.
Receive by Nov 30estimated, may change
Remanufactured
Hammer Strength Select Standing Calf
390 lb weight stack
A rare stack size for selectorized machines
$2,795.00
Save $3,104 (52%)
vs $5,899 new
Out of Stock
Want it when it’s back?
Leave your email and we’ll tell you the moment this machine is available again. No newsletter, just the restock.
See similar machines in stock →Parts & Labor, Fully Rebuilt
Remanufactured to full mechanical spec, covered from the day it lands.
Bars, handles and straps shown in photos are not always included. Check the description, or add attachments to your order.
Shipping calculator
Enter your state and ZIP code to see delivery options and prices.
Machine overview
Condition: Remanufactured
Warranty: 1 Year Parts & Labor (Extended Available)
Returns: 30-Day Returns & Exchanges
Shipping: Driveway Delivery, or Inside Delivery & Assembly
Receive by: Nov 30
How It Ships: Fully Assembled
Delivery options
How delivery works
Your item’s shipping method and price are confirmed in the shipping calculator and at checkout. Here is what each delivery path means.
Driveway freight delivery
Your equipment is palletized and protected. The freight carrier schedules delivery, then uses a liftgate to lower it to your curb or driveway. Moving it inside and unpacking it are up to you.
Inside delivery & assembly
When selected and available for your address, the delivery team brings the equipment into the room, assembles and tests it, then removes the packaging.
Full truckload
For commercial builds and multi-pallet orders, a dedicated trailer keeps the full order together in one delivery. We confirm the unloading plan before the truck ships.
Size: 58" × 45" × 72" tall
What Remanufactured Means
Every remanufactured machine is fully disassembled, deep cleaned, repaired or re-parted to factory spec, then tested under load before it ships. Backed by one year parts and labor, with extended coverage available.
Warranty Coverage
New and remanufactured equipment are both covered for one year, parts and labor, backed by us. Extended protection is available on either through BAG Care+. Used equipment is sold as-is with no warranty coverage, and is described honestly before you buy. We service nationwide - every ZIP code in the country - so coverage travels with the machine.
30-Day Returns & Exchanges
Change your mind within 30 days of delivery and you can return the machine or exchange it for a different size, color or configuration.
Return shipping is the customer's responsibility and a 15% restocking fee applies to preference returns and exchanges. Freight items must go back packaged to the same standard they arrived in. We will tell you exactly what that means before anything is collected.
Anything that arrives damaged or fails under warranty is handled separately and carries no restocking fee. Full terms are in our Returns, Exchange & Refund Policy.
Add before it ships
Before the freight bookingCoverage and accessories have to go on the same booking as the machine. Add them here and they travel together.
Extended warrantyRecommendedEvery machine includes 1 year parts and labor.
Pairs well with this
Nothing selected yet
Added as separate lines on your order.
Rebuilt in our Jarrell, TX shop
What remanufactured means here
Every machine we sell as remanufactured goes through the same process, whatever the brand or the price. Not a wipe-down and a price tag.
-
Inspected and stripped down
Assessed frame to console, then taken apart and checked part by part. Nothing gets judged from the outside.
-
Wear parts replaced
Belts, cables, bearings, bushings, grips and safety-critical hardware are replaced as standard, whether or not they still have life in them.
-
Refinished and rebuilt to spec
Electronics bench-tested, frames and welds checked, panels refinished, then reassembled to the manufacturer's specification.
-
Tested under load
A full operational cycle under load before it ships. Anything that fails the final check goes back through service, not onto a truck.
Get an email when new machines land
Good units go fast. We'll email you when new machines land - nothing else.
Shop photo
Real photo, similar machine
From our shop: Hammer Strength Select
A Hammer Strength Select Seated Leg Press from the same series, photographed on the pallet in our Texas shop. This model goes through the same process.
- Model shown
- Hammer Strength Select Seated Leg Press
- Stage
- Palletized
- Photographed
- Oct 7, 2026
- Where
- Our shop in Texas
- Headed to
- California
- Wrapped by
- Inspected frame to console, then fully disassembled
- Belts, cables, bearings and grips replaced as standard
- Tested under load before it ships
This photo shows a Hammer Strength Select Seated Leg Press, not this exact model. Every machine we sell goes through the same process.
See the full remanufacturing processProduct details
Commercial-grade equipment, inspected and supported by warranty.
The Hammer Strength Select Standing Calf uses nine shoulder pad height positions and contoured non-slip foot plates to accommodate the full range of user heights while keeping the ankle free to move through a complete dorsiflexion-to-plantarflexion arc. The pad height adjustment ensures the shoulders are loaded correctly relative to the hips and feet for each user rather than forcing a fixed stance - a meaningful detail for a standing calf machine where misalignment shifts load away from the gastrocnemius and into the lower back.
A 390 lb selectorized stack puts this well above the commercial average for calf machines - sufficient for the heaviest calf training loads without hitting a stack ceiling. Hammer Strength commercial construction at 680 lb, 300 lb max user weight, 58" × 45" footprint. Remanufactured.
Primary muscles targeted
Gastrocnemius Soleus
Secondary muscles
Tibialis Anterior Peroneals
Key features
9 Pad Height Positions - Correct Alignment for Every User
Nine shoulder pad height adjustments accommodate the full range of user heights - ensuring the pad loads the shoulders correctly relative to the hips and feet rather than forcing users into a fixed stance where misalignment shifts load away from the calf musculature.
Contoured Non-Slip Foot Plates - Full Ankle ROM
Contoured foot plates keep the feet stable and non-slip through the full raise while allowing the ankles to move freely through complete dorsiflexion to plantarflexion - enabling full calf stretch at the bottom and complete contraction at the top of every rep.
390 lb Stack - Above Commercial Average
A 390 lb weight stack places this well above the commercial average for standing calf machines - enough capacity for the heaviest calf training loads without approaching a stack ceiling, supporting serious progressive overload through advanced development.
Specifications
Dimensions (L × W × H)
58" × 45" × 72"
Machine Weight
680 lb
Max user weight: 300 lb
Weight Stack
390 lb
Selectorized · 9 pad height positions
Design
9 Pad Positions · Non-Slip Foot Plates · 390 lb
9 pad height positions · Contoured non-slip foot plates · Full ankle ROM · 390 lb stack · Commercial Hammer Strength construction
1. What are the exact dimensions and footprint of this standing calf machine?
This machine measures 58 inches long, 45 inches wide, and 72 inches high, with a footprint of 18 square feet. Allowing extra clearance around the machine is recommended for safe and comfortable use.
2. How much weight can the selectorized stack provide, and is it suitable for heavy calf training?
The selectorized weight stack provides up to 390 pounds, which is above the commercial average for standing calf machines and supports heavy progressive overload.
3. What muscles does this machine target and how does its design support effective training?
It primarily targets the gastrocnemius and soleus, with secondary emphasis on the tibialis anterior and peroneals. The nine shoulder pad height positions and contoured non-slip foot plates help ensure correct alignment and a full ankle range of motion.
4. What is the maximum user weight for this machine?
The maximum user weight is 300 pounds.
5. What condition can I expect from a remanufactured unit?
Remanufactured machines are fully disassembled, cleaned, repaired, and tested in Texas, with worn parts replaced. Cosmetic marks from previous use may remain.
6. What delivery and assembly options are available for this machine?
You can choose Driveway Freight Delivery or Inside Delivery & Assembly at checkout. Stairs require a separate quote, and the estimated receive-by date is shown on the product page.
30-Day Returns & Exchanges
Buy with confidence. Every Build A Gym order includes a 30-day window to return or exchange, whether you want a different size, color or configuration. Return shipping is the customer's responsibility and a 15% restocking fee applies to preference returns; warranty and damage claims carry no restocking fee. Full details in our Returns, Exchange & Refund Policy.
The Hammer Strength Select Standing Calf uses nine shoulder pad height positions and contoured non-slip foot plates to accommodate the full range of user heights while keeping the ankle free to move through a complete dorsiflexion-to-plantarflexion arc. The pad height adjustment ensures the shoulders are loaded correctly relative to the hips and feet for each user rather than forcing a fixed stance - a meaningful detail for a standing calf machine where misalignment shifts load away from the gastrocnemius and into the lower back.
A 390 lb selectorized stack puts this well above the commercial average for calf machines - sufficient for the heaviest calf training loads without hitting a stack ceiling. Hammer Strength commercial construction at 680 lb, 300 lb max user weight, 58" × 45" footprint. Remanufactured.
Primary muscles targeted
Gastrocnemius Soleus
Secondary muscles
Tibialis Anterior Peroneals
Key features
9 Pad Height Positions - Correct Alignment for Every User
Nine shoulder pad height adjustments accommodate the full range of user heights - ensuring the pad loads the shoulders correctly relative to the hips and feet rather than forcing users into a fixed stance where misalignment shifts load away from the calf musculature.
Contoured Non-Slip Foot Plates - Full Ankle ROM
Contoured foot plates keep the feet stable and non-slip through the full raise while allowing the ankles to move freely through complete dorsiflexion to plantarflexion - enabling full calf stretch at the bottom and complete contraction at the top of every rep.
390 lb Stack - Above Commercial Average
A 390 lb weight stack places this well above the commercial average for standing calf machines - enough capacity for the heaviest calf training loads without approaching a stack ceiling, supporting serious progressive overload through advanced development.
Specifications
Dimensions (L × W × H)
58" × 45" × 72"
Machine Weight
680 lb
Max user weight: 300 lb
Weight Stack
390 lb
Selectorized · 9 pad height positions
Design
9 Pad Positions · Non-Slip Foot Plates · 390 lb
9 pad height positions · Contoured non-slip foot plates · Full ankle ROM · 390 lb stack · Commercial Hammer Strength construction
1. What are the exact dimensions and footprint of this standing calf machine?
This machine measures 58 inches long, 45 inches wide, and 72 inches high, with a footprint of 18 square feet. Allowing extra clearance around the machine is recommended for safe and comfortable use.
2. How much weight can the selectorized stack provide, and is it suitable for heavy calf training?
The selectorized weight stack provides up to 390 pounds, which is above the commercial average for standing calf machines and supports heavy progressive overload.
3. What muscles does this machine target and how does its design support effective training?
It primarily targets the gastrocnemius and soleus, with secondary emphasis on the tibialis anterior and peroneals. The nine shoulder pad height positions and contoured non-slip foot plates help ensure correct alignment and a full ankle range of motion.
4. What is the maximum user weight for this machine?
The maximum user weight is 300 pounds.
5. What condition can I expect from a remanufactured unit?
Remanufactured machines are fully disassembled, cleaned, repaired, and tested in Texas, with worn parts replaced. Cosmetic marks from previous use may remain.
6. What delivery and assembly options are available for this machine?
You can choose Driveway Freight Delivery or Inside Delivery & Assembly at checkout. Stairs require a separate quote, and the estimated receive-by date is shown on the product page.
30-Day Returns & Exchanges
Buy with confidence. Every Build A Gym order includes a 30-day window to return or exchange, whether you want a different size, color or configuration. Return shipping is the customer's responsibility and a 15% restocking fee applies to preference returns; warranty and damage claims carry no restocking fee. Full details in our Returns, Exchange & Refund Policy.
Save 5%
Complete the room
The machines our install crew puts in the same room as this one - priced as one shipment, delivered in one booking.
$2,795.00
This machine
Bundle total
- Items
- $5,365.00
- Bundle price
- $5,096.75
- Estimated bundle saving
- −$268.25
- Everything arrives by
- Nov 30
One freight booking, one delivery window, one crew. Inside Delivery & Assembly available on the whole bundle.